LC-20: Large Lever Clip for FG- and T-Series Valves

LC-20: Large Lever Clip for FG- and T-Series Valves

The New Safety Clip from Fumoto confirms that the valve is 100% closed, and prevents the valve from opening under the extreme driving conditions in heavy debris. Unlike the old LC-15 lever clip, the new LC-20 can also be installed on our large elbow valves.

No Tool required!

LC-20 LEVER LOCKING CLIP

Using the Lever Clip confirms that the valve is 100% closed because the clip cannot be properly attached while the lever is not in the locked position with the valve. In addition, the Lever Clip prevents the valve from opening accidentally while driving under the extreme conditions such as off-road, bush areas, etc.

HOW TO USE:

Confirm the valve is closed. The lever must be in the locked position in order to attach the clip.
Insert the lever clip against the lever until it clicks. You must see the clip's "Fumoto" logo without it being upside-down.
To remove it, just pull it out with your fingers pinching around the logo part.

There are no comments yet. Be the first to leave a comment